| Printing Products Home|  Dampening Sleeves Home |  Technical Literature | Sample  Request | Material Safety Data Sheets |

Water Form Roller
Press Application Table
Rogers Dampening Sleeves

O - Z
Press Model

Sleeve

Water Form Rollers
Outside Diameter
Inches mm
Offset
(Shinohara)
formerly Fuji		 50, 52

20522

 2.065 +/- 0.004 52.451 +/- 0.10
58

19728

 1.985 +/- 0.004 50.419 +/- 0.10
58 (new)

20528

 2.065 +/- 0.004 52.451 +/- 0.10
65, 65 TP

23032

 2.310 +/- 0.004 58.674 +/- 0.10
Rotaprint R 30

18522

 1.860 +/- 0.004 47.244 +/- 0.10
Ryobi 510 - 1st water form roller

18520

 1.860 +/- 0.004 47.244 +/- 0.10
510 - 2nd water form roller

17222

 1.735 +/- 0.004 44.069 +/- 0.10
512 - 1st water form roller

18520

 1.860 +/- 0.004 47.244 +/- 0.10
512 - 2nd water form roller

17222

 1.735 +/- 0.004 44.069 +/- 0.10
430

21019

 2.110 +/- 0.004 53.594 +/- 0.10
520, 522, 524

18524

 1.860 +/- 0.004 47.244 +/- 0.10
480

21022

 2.110 +/- 0.004 53.594 +/- 0.10
640, 640K

22228

 2.235 +/- 0.004 56.769 +/- 0.10
480K

17222

 1.735 +/- 0.004 44.069 +/- 0.10
500N

21022

 2.110 +/- 0.004 53.594 +/- 0.10
3200 MCD, 3302

21019

 2.110 +/- 0.004 53.594 +/- 0.10
Sakurai Oliver OL - 48, 52 (Oliver 6)

18522

 1.860 +/- 0.004 47.244 +/- 0.10
Oliver OL - 58, 528 (Oliver 8)

19728

 1.985 +/- 0.004 50.419 +/- 0.10
Oliver OL - 66

25132

 2.527 +/- 0.004 64.186 +/- 0.10
Oliver OL - 72, 272 (Oliver 12)

25132

 2.527 +/- 0.004 64.186 +/- 0.10
Oliver OL - 82, 282 (Oliver 16)

25136

 2.527 +/- 0.004 64.186 +/- 0.10
Schriber Bantam

19722

 1.985 +/- 0.004 50.419 +/- 0.10
27 inches

22228

 2.235 +/- 0.004 56.769 +/- 0.10
Solna C-96 Webs 27242 2.740 +/- 0.004 69.596 +/- 0.10
Chief 24 (before 1800)

22228

 2.235 +/- 0.004 56.769 +/- 0.10
Chief 24 (1800 and up)

23028

 2.310 +/- 0.004 58.674 +/- 0.10
125, 225, 425, p-125

22228

 2.235 +/- 0.004 56.769 +/- 0.10
126, 226

22228

 2.235 +/- 0.004 56.769 +/- 0.10
130, 230 27232 2.740 +/- 0.004 69.596 +/- 0.10
129, 132, 232

25136

 2.527 +/- 0.004 64.186 +/- 0.10
240

25142

 2.527 +/- 0.004 64.186 +/- 0.10
64 series

22228

 2.235 +/- 0.004 56.769 +/- 0.10
154

19722

 1.985 +/- 0.004 50.419 +/- 0.10
Thatcher TP 36 27238 2.740 +/- 0.004 69.596 +/- 0.10
Toshiba*
(See note)
Townsend T- 51 units for AM 1250, Chief 15, & AB Dick 350 (before 1974)

21011

 2.110 +/- 0.004 53.594 +/- 0.10
T- 51 units for AM 1250, Chief 15, & AB Dick 350 (1974 and newer)

21014

 2.110 +/- 0.004 53.594 +/- 0.10
T- 51 units for AM 1250W, Chief 17, &
AB Dick 350

21014

 2.110 +/- 0.004 53.594 +/- 0.10
T- 51 1250, W & LW, T51-1250 Old

21014

 2.110 +/- 0.004 53.594 +/- 0.10
T- 51 1360,  T51-1650, T-51, 350, T-51 360 Old

21014

 2.110 +/- 0.004 53.594 +/- 0.10
T- 51 units for Ryobi 3200 MCD

21014

 2.110 +/- 0.004 53.594 +/- 0.10
T- 51 380, T-51 385

21024

 2.110 +/- 0.004 53.594 +/- 0.10
Vandercook RO 4-29

19732

 1.985 +/- 0.004 50.419 +/- 0.10
Web Press Web Leader 28538 2.865 +/- 0.004 72.771 +/- 0.10
Webendorfer M, MA, MAC 22224 2.235 +/- 0.004 56.769 +/- 0.10
S 22232 2.235 +/- 0.004 56.769 +/- 0.10
Western Gear P-26 24728 2.485 +/- 0.004 63.119 +/- 0.10
Speedflex 1713

19714

 1.985 +/- 0.004 50.419 +/- 0.10
Speedflex 1719 and Dart 22224 2.235 +/- 0.004 56.769 +/- 0.10
Speedflex 27

19728

 1.985 +/- 0.004 50.419 +/- 0.10
Hendry 45-1/2 x 37-1/2   inches

30338

 3.051 +/- 0.004 77.496 +/- 0.10
Wood-Hoe Uniman 36040 3.615 +/- 0.004 91.821 +/- 0.10
Zenith 34778 3.490 +/- 0.004 88.646 +/- 0.10
Jobber 22

19724

 1.985 +/- 0.004 50.419 +/- 0.10
23

18524

 1.860 +/- 0.004 47.244 +/- 0.10
25

21028

 2.110 +/- 0.004 53.594 +/- 0.10
29

27232

 2.740 +/- 0.004 69.596 +/- 0.10
301, 302, 304 24732 2.485 +/- 0.004 63.119 +/- 0.10
Zephyr 26, 300, 420, RZ-90

27228

 2.740 +/- 0.004 69.596 +/- 0.10
14 x 20 inches (above 10700)

19722

 1.985 +/- 0.004 50.419 +/- 0.10
Romayer 5133

19722

 1.985 +/- 0.004 50.419 +/- 0.10
Webmatic (upper)

27228

 2.740 +/- 0.004 69.596 +/- 0.10
Planeta 28 x 40 inches

27242

 2.740 +/- 0.004 69.596 +/- 0.10
Planeta 50

39154

 3.925 +/- 0.004 99.695 +/- 0.10
Planeta 55

39158

 3.925 +/- 0.004 99.695 +/- 0.10
Planeta 44 x 64 inches

39166

 3.925 +/- 0.004 99.695 +/- 0.10
Royal Zenith 15 S

19714

 1.985 +/- 0.004 50.419 +/- 0.10
Royal Zenith 20 S

19722

 1.985 +/- 0.004 50.419 +/- 0.10
Royal Zenith 126, TP 226

19728

 1.985 +/- 0.004 50.419 +/- 0.10
 

To View: Tables A-C, Tables D-K, Table M

Notes:
Heidelberg - Model names containing the suffixes Z, V, F and S denote number of press units (2, 4, 5 and 6).
P denotes "perfecting". These suffixes do not indicate a different sleeve size.

Mitsubishi and Toshiba - These web presses are furnished with a wide range of bareback form rollers which should be measured to determine the appropriate size.

The following presses have integrated dampening systems which are not suitable for Rogers dampening sleeves:

  • AB Dick - all presses except AB Dick 9985
  • MGD 20, 22
  • Ryobi 2700, 22800, 3200 without MCD
  • Didde Graphics Compupress, Webcom, 860

This technical bulletin contains a table for selecting the appropriate Rogers Dampening Sleeve for a specific printing press. The press application table contains the water form outside roll diameter to provide the standard diameter in inches and millimeters for each dampening sleeve. This list of commonly used printing presses will show which dampening sleeve would properly fit the dampening form outside roll of those presses. 

A dampening sleeve is identified by its product number. The product number contains five digits; the first three digits represent the nominal diameter of the sleeve (sleeve code), the last two digits represent the sleeve length in inches.

For the sleeve to fit properly, the dampening form roller must be ground to the diameter listed for the sleeve code.

After applying a new dampening form roller, be sure to adjust for sleeve-to-plate and sleeve-to-vibrator (or distributor roller) pressure according to procedures in your operator's manual. Some presses have enough adjustment latitude to function with more than one sleeve/roller diameter.

This information is not intended to and does not create any warranty, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.

Rogers Corporation, High Performance Foams Division
One Technology Drive, Rogers, CT 06263-0217
Phone: 860 774-9605/ Fax: 860 779-5780/ Site Feedback:
Copyright ©2006 Rogers Corporation, All Rights Reserved - Disclaimer - Privacy Policy - Security Statement 
 ISO 9002 Registered Firm

The world runs better with Rogers.™