| Printing Products Home|  Dampening Sleeves Home |  Technical Literature | Sample  Request | Material Safety Data Sheets |

Water Form Roller
Press Application Table
Rogers Dampening Sleeves

M
Press Model

Sleeve

Water Form Rollers
Outside Diameter
Inches mm
Mailander Model 1-C

27228

 2.740 +/- 0.004 69.596 +/- 0.10
Model 2-C

27238

 2.740 +/- 0.004 69.596 +/- 0.10
Model 250

27240

 2.740 +/- 0.004 69.596 +/- 0.10
Model 3-C

34748

 3.490 +/- 0.004 88.646 +/- 0.10
Model 4-C

34752

 3.490 +/- 0.004 88.646 +/- 0.10
Model 5-C

34758

 3.490 +/- 0.004 88.646 +/- 0.10
Model 241

32252

 3.240 +/- 0.004 82.296 +/- 0.10
Mann L 135

27238

 2.740 +/- 0.004 69.596 +/- 0.10
L 136, L 236 28538 2.865 +/- 0.004 72.771 +/- 0.10
L 142, L 242 28548 2.865 +/- 0.004 72.771 +/- 0.10
L 148A, L 248A 33552 3.365 +/- 0.004 85.471 +/- 0.10
L 154C, L 254C 33558 3.365 +/- 0.004 85.471 +/- 0.10
L 159C, L 259C 33562 3.365 +/- 0.004 85.471 +/- 0.10
LP 53, LP 54 Perfector 33558 3.365 +/- 0.004 85.471 +/- 0.10
Marinoni 42 x 59"  Perfector - upper 33562 3.365 +/- 0.004 85.471 +/- 0.10
42 x 59"  Perfector - lower 41362 4.149 +/- 0.004 105.385 +/- 0.10
ML 3 21036 2.110 +/- 0.004 53.594+/- 0.10
ML 4 21038 2.110 +/- 0.004 53.594+/- 0.10
ML 5 25142 2.527 +/- 0.004 64.186+/- 0.10
ML 6 25148 2.527 +/- 0.004 64.186+/- 0.10
ML 7, ML 9 lower 33552 3.365 +/- 0.004 85.471+/- 0.10
ML 7, ML 9 upper 41352 4.149 +/- 0.004 105.385+/- 0.10
ML 10 lower 33566 3.365 +/- 0.004 85.471+/- 0.10
ML 10 upper 41366 4.149 +/- 0.004 105.385+/- 0.10
Mergenthaler Invicta 38, 400 29740 2.990 +/- 0.004 75.946+/- 0.10
Media Master 27, 30 29736 2.990 +/- 0.004 75.946+/- 0.10
Media Master 36 29738 2.990 +/- 0.004 75.946+/- 0.10
Newsmaster 34738 3.490 +/- 0.004 88.646+/- 0.10
Pacer 36 27238 2.740 +/- 0.004 69.596+/- 0.10
400-38 29740 2.990 +/- 0.004 75.946+/- 0.10
500-40 29742 2.990 +/- 0.004 75.946+/- 0.10
600-50 33552 3.365 +/- 0.004 85.471+/- 0.10
600-56 33558 3.365 +/- 0.004 85.471+/- 0.10
600-63 33566 3.365 +/- 0.004 85.471+/- 0.10
Miehle Favorite 25128 2.527 +/- 0.004 64.186+/- 0.10
25 s/c, 25 2/c (below2919) 25132 2.527 +/- 0.004 64.186+/- 0.10
25 2/c (2919 and up) 27232 2.740 +/- 0.004 69.596+/- 0.10
28, 29 2/c, 29 2/c (below 2924) 25132 2.527 +/- 0.004 64.186+/- 0.10
29 2/c (2924 and up) 27232 2.740 +/- 0.004 69.596+/- 0.10
36 25138 2.527 +/- 0.004 64.186+/- 0.10
38 s/c (below 2422) 25140 2.527 +/- 0.004 64.186+/- 0.10
38 s/c (2913 and up) 27240 2.740 +/- 0.004 69.596+/- 0.10
38 2/c (below 2657, except 2631 thru 2640) 25140 2.527 +/- 0.004 64.186+/- 0.10
38 2/c (2929 and up and 2631 thru 2640) 27240 2.740 +/- 0.004 69.596+/- 0.10
39 4/c 27240 2.740 +/- 0.004 69.596+/- 0.10
41 s/c (below 790) 33548 3.365 +/- 0.004 85.471+/- 0.10
41 s/c (943 and up) 34748 3.490 +/- 0.004 88.646+/- 0.10
41 2/c (below 798) 33548 3.365 +/- 0.004 85.471+/- 0.10
41 2/c (946 and up) 34748 3.490 +/- 0.004 88.646+/- 0.10
41 s/c, 2/c, 4/c 34752 3.490 +/- 0.004 88.646+/- 0.10
54 s/c, 2/c 39758 3.990 +/- 0.004 101.350+/- 0.10
54 4/c, 57 34758 3.490 +/- 0.004 88.646+/- 0.10
61 34762 3.490 +/- 0.004 88.646+/- 0.10
361 (web) 29738 2.990 +/- 0.004 75.946+/- 0.10
381, 383 (web) 29740 2.990 +/- 0.004 75.946+/- 0.10
76 x 77 inches 34778 3.490 +/- 0.004 88.646+/- 0.10
Miller W-22 24728 2.485 +/- 0.004 63.119+/- 0.10
Ebco 22 x 34 inches 24738 2.485 +/- 0.004 63.119+/- 0.10
TP - 29, TP - 32, TPJ, SJ 24738 2.485 +/- 0.004 63.119+/- 0.10
TP - 38 24740 2.485 +/- 0.004 63.119+/- 0.10
TP - 41S 31342 3.145 +/- 0.004 79.883+/- 0.10
TP - 54 37858 3.801 +/- 0.004 96.546+/- 0.10
MAN III 29740 2.990 +/- 0.004 75.946+/- 0.10
MAN IV 34748 3.490 +/- 0.004 88.646+/- 0.10
MAN IV-S 39148 3.925 +/- 0.004 99.695+/- 0.10
MAN V 34752 3.490 +/- 0.004 88.646+/- 0.10
MAN V-S 39152 3.925 +/- 0.004 99.695+/- 0.10
MAN VI 34758 3.490 +/- 0.004 88.646+/- 0.10
MAN VI-S 39158 3.925 +/- 0.004 99.695+/- 0.10
MAN VII-S 39162 3.925 +/- 0.004 99.695+/- 0.10
Mitsubishi*
(See note)
 

To View: Tables A-C, Tables D-K, Tables O-Z

Notes:
Heidelberg - Model names containing the suffixes Z, V, F and S denote number of press units (2, 4, 5 and 6).
P denotes "perfecting". These suffixes do not indicate a different sleeve size.

Mitsubishi and Toshiba - These web presses are furnished with a wide range of bareback form rollers which should be measured to determine the appropriate size.

The following presses have integrated dampening systems which are not suitable for Rogers dampening sleeves:

  • AB Dick - all presses except AB Dick 9985
  • MGD 20, 22
  • Ryobi 2700, 22800, 3200 without MCD
  • Didde Graphics Compupress, Webcom, 860

This technical bulletin contains a table for selecting the appropriate Rogers Dampening Sleeve for a specific printing press. The press application table contains the water form outside roll diameter to provide the standard diameter in inches and millimeters for each dampening sleeve. This list of commonly used printing presses will show which dampening sleeve would properly fit the dampening form outside roll of those presses. 

A dampening sleeve is identified by its product number. The product number contains five digits; the first three digits represent the nominal diameter of the sleeve (sleeve code), the last two digits represent the sleeve length in inches.

For the sleeve to fit properly, the dampening form roller must be ground to the diameter listed for the sleeve code.

After applying a new dampening form roller, be sure to adjust for sleeve-to-plate and sleeve-to-vibrator (or distributor roller) pressure according to procedures in your operator's manual. Some presses have enough adjustment latitude to function with more than one sleeve/roller diameter.

This information is not intended to and does not create any warranty, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.

Rogers Corporation, High Performance Foams Division
One Technology Drive, Rogers, CT 06263-0217
Phone: 860 774-9605/ Fax: 860 779-5780/ Site Feedback:
Copyright ©2006 Rogers Corporation, All Rights Reserved - Disclaimer - Privacy Policy - Security Statement 
 ISO 9002 Registered Firm

The world runs better with Rogers.™