| Printing Products Home|  Dampening Sleeves Home |  Technical Literature | Sample  Request | Material Safety Data Sheets |

Water Form Roller
Press Application Table
Rogers Dampening Sleeves
 

D-H

Press Model

Sleeve

Water Form Rollers
Outside Diameter
Inches mm
Davidson 221, 241, 251 23011 2.310 +/- 0.004 58.674 +/- 0.10
223 23019 2.310 +/- 0.004 58.674 +/- 0.10
400, 500, 501 including BB 23011 2.310 +/- 0.004 58.674 +/- 0.10
500, 501, 502 Perfector including BB 23011 2.310 +/- 0.004 58.674 +/- 0.10
600, 601, 700, 701, 702 Perfector incl. BB 23019 2.310 +/- 0.004 58.674 +/- 0.10
650, 900, 901 including Perfector 23022 2.310 +/- 0.004 58.674 +/- 0.10
Didde Graphics Apollo, IBM - 9370, Tandemer 8-1/2" 13014 1.310 +/- 0.004 33.274 +/- 0.10
Tandemer 17", Conserver, Minicom 17" 19714 1.985 +/- 0.004 50.419 +/- 0.10
175 19719 1.985 +/- 0.004 50.419 +/- 0.10
Gestener 313 21014 2.110 +/- 0.004 53.594 +/- 0.10
Goebel Optiforma

28522

 2.865 +/- 0.004 72.771 +/- 0.10
Goss (Rockwell
International)		 Community

27238

 2.740 +/- 0.004 69.596 +/- 0.10
Metro 66

49772

 4.490 +/- 0.004 114.046 +/- 0.10
Publication 34-1/2 x 50"

44752

 4.490 +/- 0.004 114.046 +/- 0.10
Suburban

31338

 3.145 +/- 0.004 79.883 +/- 0.10
C-500

34742
Suburbanite signature

30338

 3.051 +/- 0.004 77.496 +/- 0.10
Urbanite

34738

 3.490 +/- 0.004 88.646 +/- 0.10
Hantscho 36 inches

29738

 2.990 +/- 0.004 75.946 +/- 0.10
38 inches commercial

36040

 3.615 +/- 0.004 91.821 +/- 0.10
42 inches

29742

 2.990 +/- 0.004 75.946 +/- 0.10
50 inches

36052

 3.615 +/- 0.004 91.821 +/- 0.10
50 inches New Series

39152

 3.925 +/- 0.004 99.695 +/- 0.10
50 inches New Series

39752

 3.990 +/- 0.004 101.350 +/- 0.10
63 inches and 64 inches

39165

 3.925 +/- 0.004 99.695 +/- 0.10
Mark II 32 & 34 inches, Mark IV 33 inches

31336

 3.145 +/- 0.004 79.883 +/- 0.10
Mark II 36 inches

31338

 3.145 +/- 0.004 79.883 +/- 0.10
Mark II, Mark IV, Mark VI, Mark VII 38 inches

31340

 3.145 +/- 0.004 79.883 +/- 0.10
Mark V 26 inches

31328

 3.145 +/- 0.004 79.883 +/- 0.10
Hamada C248, C252 + B334

18522

 1.860 +/- 0.004 47.244 +/- 0.10
RS34-M, VS34-M

20514

 2.065 +/- 0.004 52.451 +/- 0.10
500, 550 incl. CDA, 600, 601, 602, 612, 612VL, 612ECD, 660, 62 Color

21014

 2.110 +/- 0.004 53.594 +/- 0.10
700, 770, 760DX, 700CD, 700CDX, E47

21019

 2.110 +/- 0.004 53.594 +/- 0.10
800, 880 DX/SX

21022

 2.110 +/- 0.004 53.594 +/- 0.10
C-24 AE

21022

 2.110 +/- 0.004 53.594 +/- 0.10
900 CD, 1100

21028

 2.110 +/- 0.004 53.594 +/- 0.10
Harris Color J

19719

 1.985 +/- 0.004 50.419 +/- 0.10
17 x 22 inches LTG, XLTG

18524

 1.860 +/- 0.004 47.244 +/- 0.10
17 x 22 inches LTV, LXD

21024

 2.110 +/- 0.004 53.594 +/- 0.10
17 x 22 inches LSB

22224

 2.235 +/- 0.004 56.769 +/- 0.10
20 x 26 inches LUS, LXF

21028

 2.110 +/- 0.004 53.594 +/- 0.10
21 x 28 inches LTC, XLTC

19732

 1.985 +/- 0.004 50.419 +/- 0.10
21 x 28 inches LTW, XLTW, LXG, TWB

21032

 2.110 +/- 0.004 53.594 +/- 0.10
21 x 28 inches LSN

22232

 2.235 +/- 0.004 56.769 +/- 0.10
22 x 34 inches EL

30338

 3.051 +/- 0.004 77.496 +/- 0.10
22 x 34 inches LTN, LTP

21038

 2.110 +/- 0.004 53.594 +/- 0.10
22 x 38 inches LUL, LUM, TWC

21040

 2.110 +/- 0.004 53.594 +/- 0.10
25 x 38 inches LSQ, LSR, LUB

30348

 3.490 +/- 0.004 88.646 +/- 0.10
36 x 36" Metal Decorator MDE, MDF, MDG, MDH

32238

 3.240 +/- 0.004 82.296 +/- 0.10
32 x 44 inches LSC, LSD, LSE

30348

 3.490 +/- 0.004 88.646 +/- 0.10
36 x 45 inches LSS, LST, LUD, LUE

30352

 3.051 +/- 0.004 77.496 +/- 0.10
36 x 48 inches S7L

30352

 3.051 +/- 0.004 77.496 +/- 0.10
36 x 49 inches LUN, LUP, TWG

30352

 3.051 +/- 0.004 77.496 +/- 0.10
38 x 52 inches LB, GT, HT, JT

30358

 3.051 +/- 0.004 77.496 +/- 0.10
41 x 54 inches LSW, LSX, LSZ

30358

 3.051 +/- 0.004 77.496 +/- 0.10
42 x 58 inches LTK, LTL, LTM

34762

 3.490 +/- 0.004 88.646 +/- 0.10
42 x 58 inches LSJ, LSK, LSL, LSM

30362

 3.051 +/- 0.004 77.496 +/- 0.10
44 x 58 inches LE

30362

 3.051 +/- 0.004 77.496 +/- 0.10
43 x 60 inches LVA, LVB, LVC, LVD, LVE, LVF

34762

 3.490 +/- 0.004 88.646 +/- 0.10
42 x 64 inches LTA, LTB

30372

 3.051 +/- 0.004 77.496 +/- 0.10
46 x 68" LSF (to 114), LSG (to 126), LSH (to 105)

34772

 3.490 +/- 0.004 88.646 +/- 0.10
46 x 68" LSF (115 up), LSG (127 up), LSH (106 up)

37872

 3.801 +/- 0.004 96.546 +/- 0.10
50 x 72  inches LTQ, ITR, LTS

39174

 3.925 +/- 0.004 99.695 +/- 0.10
52 x 76 inches LTX, LTY, LTE

37879

 3.801 +/- 0.004 96.546 +/- 0.10
52 x 76  inches LUJ

39179

 3.925 +/- 0.004 99.695 +/- 0.10
Heidelberg*
(See note)		 GTO 46

18519

 1.860 +/- 0.004 47.244 +/- 0.10
GTO 52

18822

 1.890 +/- 0.004 48.006 +/- 0.10
KOR, KORA

19724

 1.985 +/- 0.004 50.419 +/- 0.10
KORD 62, 64

19728

 1.985 +/- 0.004 50.419 +/- 0.10
KORS

19732

 1.985 +/- 0.004 50.419 +/- 0.10
M, MO

19728

 1.985 +/- 0.004 50.419 +/- 0.10
SORK

25128

 2.527 +/- 0.004 64.186 +/- 0.10
SORM

25132

 2.527 +/- 0.004 64.186 +/- 0.10
SOR

25136

 2.527 +/- 0.004 64.186 +/- 0.10
SORD

25138

 2.527 +/- 0.004 64.186 +/- 0.10
SORS

25142

 2.527 +/- 0.004 64.186 +/- 0.10
Speedmaster 72

25132

 2.527 +/- 0.004 64.186 +/- 0.10
Speedmaster 102

25142

 2.527 +/- 0.004 64.186 +/- 0.10
Rotaspeed

28042

 2.815 +/- 0.004 71.501 +/- 0.10
HOE Metal Decorator 20 x 36", 29 x 32", 34 x 36"

32240

 3.240 +/- 0.004 82.296 +/- 0.10
Metal Decorator 34 x 45"

32252

 3.240 +/- 0.004 82.296 +/- 0.10
 

I-J
Press Model

Sleeve

Water Form Rollers
Outside Diameter
Inches mm
Inoprint (Inovative Equip. Co.) 204 19722 1.985 +/- 0.004 50.419 +/- 0.10
Itek 975 molleton, 985, 985 CBD, 3985 21019 2.110 +/- 0.004 53.594 +/- 0.10
1115 21011 2.110 +/- 0.004 53.594 +/- 0.10
1117 21014 2.110 +/- 0.004 53.594 +/- 0.10
King (Solna- King Press) Color King 26038 2.615 +/- 0.004 66.421 +/- 0.10
News King 26038 2.615 +/- 0.004 66.421 +/- 0.10
Production King 37838 3.801 +/- 0.004 96.550 +/- 0.10
Koenig and Bauer KRO S/C, T/C, 4/C 23032 2.310 +/- 0.004 58.674 +/- 0.10
Rapida O 23032 2.310 +/- 0.004 58.674 +/- 0.10
Rapida Perfector 111 23042 2.310 +/- 0.004 58.674 +/- 0.10
Super Rapida 111 23042 2.310 +/- 0.004 58.674 +/- 0.10
Kimori Kony 10 27240 2.740 +/- 0.004 69.596 +/- 0.10
Sprint 25128 2.527 +/- 0.004 64.186 +/- 0.10
Super 9 27242 2.740 +/- 0.004 69.596 +/- 0.10
Lithrone 40 39742 3.990 +/- 0.004 101.350 +/- 0.10
 

To View: Tables A-C, Table M, Tables O-Z

Notes:
Heidelberg - Model names containing the suffixes Z, V, F and S denote number of press units (2, 4, 5 and 6).
P denotes "perfecting". These suffixes do not indicate a different sleeve size.

Mitsubishi and Toshiba - These web presses are furnished with a wide range of bareback form rollers which should be measured to determine the appropriate size.

The following presses have integrated dampening systems which are not suitable for Rogers dampening sleeves:

  • AB Dick - all presses except AB Dick 9985
  • MGD 20, 22
  • Ryobi 2700, 22800, 3200 without MCD
  • Didde Graphics Compupress, Webcom, 860

This technical bulletin contains a table for selecting the appropriate Rogers Dampening Sleeve for a specific printing press. The press application table contains the water form outside roll diameter to provide the standard diameter in inches and millimeters for each dampening sleeve. This list of commonly used printing presses will show which dampening sleeve would properly fit the dampening form outside roll of those presses. 

A dampening sleeve is identified by its product number. The product number contains five digits; the first three digits represent the nominal diameter of the sleeve (sleeve code), the last two digits represent the sleeve length in inches.

For the sleeve to fit properly, the dampening form roller must be ground to the diameter listed for the sleeve code.

After applying a new dampening form roller, be sure to adjust for sleeve-to-plate and sleeve-to-vibrator (or distributor roller) pressure according to procedures in your operator's manual. Some presses have enough adjustment latitude to function with more than one sleeve/roller diameter.

This information is not intended to and does not create any warranty, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.

Rogers Corporation, High Performance Foams Division
One Technology Drive, Rogers, CT 06263-0217
Phone: 860 774-9605/ Fax: 860 779-5780/ Site Feedback:
Copyright ©2006 Rogers Corporation, All Rights Reserved - Disclaimer - Privacy Policy - Security Statement 
 ISO 9002 Registered Firm

The world runs better with Rogers.™